How To Use Protective Face Mask

Protective face masks are loose, disposable devices that create a physical barrier between the wearer’s mouth and nose, creating potential contaminants in the immediate environment. Face masks are not shared and may be labeled as surgical, isolation, dental, or medical masks. There may or may not be a face shield. All of these are called face masks, but not all face masks are regulated as face masks.

Protective face masks are made in different thicknesses and have different abilities to protect against contact with liquids. These characteristics can also affect the ease of breathing through the face mask and the degree of protection provided by the surgical mask.

When properly worn, a surgical mask blocks large liquid droplets, splashes, sprays, or splatter that can contain bacteria (viruses or bacteria), preventing them from reaching your mouth or nose. is. Protective face masks also help reduce the exposure of saliva and respiratory secretions to others.

Protective face masks are effective at blocking splashes and droplets of large particles, while face masks, by design, filter out very small particles in the air that may be transmitted by coughing, sneezing, or certain medical procedures. Or do not block. Face masks also do not provide complete protection from bacteria and other contaminants due to the loose clearance between the face mask surface and the face.

Protective face masks are not intended to be used more than once. If the mask is damaged or dirty, or if you find it difficult to breathe through the mask, you should remove the face mask and safely dispose of it and replace it with a new one. To safely dispose of the mask, place it in a plastic bag, and put it in the trash. Wash your hands after handling a used mask.

1. Clean your hands with soap and water or with an alcohol-based hand sanitizer.

2. Make sure there are no tears or holes before putting on the mask.

3. Find the metal strip with a mask. This is the top of the mask.

4. Orient the mask so that the color side faces out or away from you.

5. Place the top of the mask on the bridge of the nose and shape the metal strip into the nose shape.

6. Carefully loop the elastic band behind your ears or tie a long straight tie behind your head.

7. Pull the bottom of the mask down to cover your nose, mouth, and chin.

8. Do not touch the mask while wearing it. If you need to touch or adjust the mask, be sure to clean your hands immediately.

9. To remove the mask, remove the band from behind your ears or your tie from behind your head. Do not touch the front of the mask, which may be contaminated.

10. Immediately throw the mask into the trash and completely clean your hands later.